1. Install AirServer at the following link: https://www.airserver.com/Download

2. Activate AirServer using the activation code: 7CT00787LX660252L

3. If your board is hard wired (has an Ethernet cable) you will need to scan the code with the AirServer Connect app. The instructions are below.


1. Ensure AirServer is running.

2. Click the arrow in the right hand corner where the time is located shown below.

3. Right click on the 'TV with an arrow in it' icon as shown below.

4. Click on the "QR Code for AirServer Connect..." as shown above.

5. Scan the QR code using your iPad.